Natural Graphite Powder
Specification: The particle size ranges from 5μm to 40μm, carbon content 95%-99.9%
Advantages: With a high quality natural flake graphite performance.
In the high temperature has a special anti-oxidation,
self-lubricating and plasticity, at the same time, has a good
electrical conductivity, electric and adhesion.
Use: Micropowder graphite can be used
(1) As a catalyst for the production of chemical fertilizer
industry Stripping lubricant
(2) The high temperature lubricant material, corrosion-resistant
lubricant material
(3) As mould release anent in power metallurgy or raw material in
metal alloy
(4) As packing or catalysts of rubber, plastics and varieties of
composite material.
Natural Flake Graphite is mainly used for metallurgical, mechanical, electrical, chemical,
textile, defense industry, electronics, light industry. Such as
refractories, made crucible, Bricks, steel ingot protective agent;
for conductive materials, producti on of carbon nanotubes, phone
parts, CRT coatings; also can be used as wear and lubrication
materials; anti corrosion materials; for casting, foundry, die and
high temperature metallurgical materials.
| Type | Spec. |
Particle Size | Size(%) | Carbon Contents
(%) | Moisture
(%) |
| Screen Oversize | Screen Undersize |
High Carbon
Graphite | 32Mesh | 560 um | ≥80 | | 94-99 | ≤0.5 |
| 50Mesh | 300 um |
| 80Mesh | 180 um |
| 100Mesh | 150 um |
| 150Mesh | 100 um | ≥75 | |
| -100Mesh | 150 um | | ≥80 |
| -200Mesh | 75 um |
Middle Carbon
Graphite | 32Mesh | 560 um | ≥80 | | 85-93 | ≤0.5 |
| 50Mesh | 300 um |
| 80Mesh | 180 um |
| 100Mesh | 150 um |
| 150Mesh | 100 um | ≥75 | |
| -100Mesh | 150 um | | ≥80 |
Q: Where is your factory located? How can I visit there?
A:Our factory is located in Shandong Province,China which has rich
coal.All our clients, from home or
abroad, are warmly welcome to visit us.
Q: How can I get the sample?
A:We’d like to supply samples free of charge, but you need pay for
the freight fees.
Q: How does your factory do regarding quality control?
A:Quality is priority. My company always attaches great importance
to quality controlling from the very beginning to the very end.
Q: How can I pay you?
A: After you confirm our PI, we will request you to pay. T/T is the
most usual ways we are using.
Q: How do you check all the goods in the production line?
A: We have spot inspection and finished product inspection. We
check the goods when they go into next step production procedure.
