Graphite Release Agent For High Temperature Casting Graphite Mould
Casting
Graphite Mould Releasing Agent
Our standard mould releasing agent is named I75L. It is a powder
made on the basis of graphite and other carbon and mineral
materials.
I75L is used as an immerse product (dip-product) applied with the
foundry of brass after the techniques of manual, mechanical and low
pressure. It is also suitable for lead-free brass casting.
Benefit of using I75L: longer durability of the die, uniform
surface of the castings, less subsequent after work of the casting.
Graphite Release Agent I75L
Description
I75L graphite mold release agent, is a temperature of maximum 1000
℃ high thermal resistant release agent,environmental protection,
non-toxic, have excellent film-forming properties,has protective
effect to mold.The lubricant can make the product forming high
transparency,smooth,increase productivity.
Product Features
1.Non-toxic, environmental protection products.
2.Good stripping performance, make the product smooth finish.
3.Excellent heat resistance and film-forming properties, even in
rapid heating at 1500 ℃ temperature, cooling repeatedly not to be
break.
4.Prolong the life of the mold, and shorten mold cleaning time,
reduce surface defected products.
| Specification | Graphite I75L is a powder made on the basis of graphite and other
carbon and mineral materials. |
| Application | Graphite I75L is used as an immerse product (dip-product) applied
with the foundry of brass after the techniques of manual,
mechanical and low pressure. Suitable for heated metal molds. |
| Treatment | ◆ Graphite I75L is mixed in distilled water or deionization water
in the proportion of 1:10 and is at once ready for use.
◆ The proportion can be changed according to the weight and
thickness of the sides.
◆ Heat the mold to at least 120℃ before using I75L.
◆ It is recommendable to keep the whole liquid in motion by
appropriate device (stirring apparatus).
|
